Product Description
The snow plow is a vehicle used to sweep the snow inside and outside the rail. After the snow plow is pushed by the locomotive, it pushes the snow to one side or both sides of the line with the help of the plow plow at the front end. The side of the vehicle is also equipped with an open wing plate to increase the snow removal surface. In addition, there are rotary snow removal vehicles, its front end is equipped with a runner perpendicular to the center line of the line, through the power of the car to drive the runner, the blades on the wheel will scrape up the snow thrown out of the line.
Snow plows are used to remove snow and ice from roads. Snow plows usually use the chassis of a dump truck as a base, plus modifications with specialized snow removal equipment. Many government agencies also use smaller vehicles to clear snow from sidewalks, paths and bike trails. Authorities and contractors responsible for road maintenance in temperate or polar regions often have a number of snow removal vehicles that can be deployed during the winter to ensure that the roads are cleared of snow and ice and that driving is safe. Airports use snow plows to remove snow and ice from aircraft surfaces, runways and taxiways. Because in addition to endangering the takeoff and landing of the aircraft, snow and ice can also cause interference with the aerodynamics of the aircraft.
Product Parameters
| Basic parameters of snow plows |
| Overall dimensions: |
8690×2500×3300(mm) |
Fuel type: |
Diesel |
| Total mass: |
18000(Kg) |
Approach/departure Angle: |
17/10(°) |
| Rated quality: |
8805(Kg) |
Front suspension rear suspension: |
1400/2330,1430/2330(mm) |
| Quality of service: |
9000(Kg) |
Maximum speed: |
89(km/h) |
| Number of shafts: |
3 |
Front wheel base: |
1876,1896,1920,1950(mm) |
| Wheelbase: |
4700(mm) |
Rear wheel base: |
1820,1860,1800,1840(mm) |
| Number of cab passengers: |
3(person) |
Number of spring pieces: |
7/9+6,8/10+8,8/9+6,11/10+8,3/10+8 |
| Number of tires: |
6(wheel) |
Axle Load: |
6500/11500 |
| Tire Specifications: |
10.00R20 18PR |
Detailed Photos
Detailed parameters
The size of the skip is 5500 long, the height of the box is 1600, the top height is 2140, the width is 2550 and the ground is 1430
Snowmelt spreader
Volume :10 (m3)
Snowmelt spreader material: carbon steel
Engine: Chassis load (optional)
Hydraulic system working pressure: ≥16MPa
Feed form: scraper (chain)
Spreading width: 2-15m
Salt amount: 20-300g/m2(adjustable)
Spreading disc diameter: 550mm
Operating speed: 5-45km/h
Control mode: wired remote control
Other features: Electric motor, oil pump, hydraulic oil radiator, fuel tank, fast power connector
Performance characteristics:
1, widely used: spread coarse salt, fine salt, deicing agent, dry sand, special snow melting agent and other functions.
2, uniform spreading: the amount of spreading, spreading width can be adjusted.
3, high-strength anticorrosion: high-strength carbon steel plate, special anticorrosion treatment.
4, easy maintenance: detachable, adjustable dumping mechanism, easy to install, clean.
5, uniform particle: spreader installation filter, can reduce large particles or debris into the equipment, to ensure the safety of equipment, pedestrians and vehicles.
6, reasonable structure: special pressure relief device in the box, protection equipment normal line. The box adopts V-type silo, which is simple and reliable in structure, so that the melting agent can automatically drop, discharge completely and have no residue.
7, stable performance, reliable quality. Discharge uniform and reliable, easy maintenance.
Optional 3-meter snow brush
(1) Snow rolling brush: 3000mm;
(2) Rolling brush diameter: 800mm;
(3) Rolling brush speed: continuous working speed 220 RPM, intermittent working speed 287 RPM;
(4) Rolling brush swing Angle plus or minus 15-20°, up and down deflection Angle 6.5°;
(5) The rolling brush bristles are arranged by a single disc combination, and the material of each brush bristles is polypropylene and elastic steel wire mixed arrangement;
(6) The ground clearance of rolling brush bristles can be accurately adjusted;
(7) wear-resistant support wheel with rolling brush bearing capacity, two in number, 360° universal wheel design;
(8) The rolling brush core is driven by hydraulic motors on both sides;
(9) The brush head is provided with a hydraulic check valve, which has a buffering effect to prevent equipment damage caused by sudden stop of the rolling brush, and is convenient to rotate the brush core to replace the brush bristles in the shutdown state;
(10) carbon steel rolling brush cover, the overall smooth can effectively prevent the accumulation of snow in the inner wall and outer wall of the cover;
(11) The rolling brush lifting and swinging cylinder adopts single-pole cylinder design, which is reliable and stable;
(12) The pipe layout is reasonable, and the outer tube of the rolling brush cover is removed to prevent the accumulation of snow and debris;
(13) The rolling brush control system is perfectly matched, which can control the flow more effectively, avoid the oil temperature rise, and ensure the normal operation for a long time in any season;
(14) The front snow brush is equipped with a snow baffle to ensure that the snow does not affect the driver's line of sight;
(15) The rolling brush adopts SQH quick connection system, with the quick connector of the oil circuit, which can be quickly separated from the car body and installed.
(16) Both sides of the rolling brush are equipped with visual width warning rods, which is convenient for the driver to control the position of the brush head during work;
(17) The rolling brush power is taken by the engine, and the rolling brush hydraulic system does not affect the lifting function of the vehicle trunk, which can be convenient for function conversion.
Control/drive mode: wired remote control | independent hydraulic unit, hydraulic motor, force extractor, hydraulic oil radiator, hydraulic quick connector, fast power connector.
3.5m snow shovel
(1) Snow shovel width: 3500mm;
(2) Snow shovel swing Angle 0-25°;
(3) The snow shovel hydraulic cylinder is hydraulically driven, and the left and right one cylinder drive can be adjusted, and the upper one cylinder drives the upper and lower adjustment of the equipment.
(4) The lifting and swinging cylinder of the snow shovel adopts the cylinder design, which is reliable and stable;
(5) The layout of the pipeline is reasonable, and the outer pipe of the snow shovel is removed to prevent the accumulation of snow and debris;
(6) The snow shovel control system is perfectly matched, which can control the flow more effectively, avoid the oil temperature rise, and ensure the normal operation for a long time in any season;
(7) The snow shovel power circuit is connected to the chassis battery, and through remote control operation, the snow shovel hydraulic system does not affect other functions of the vehicle, which can be convenient for function conversion.
(8) Suitable for additional models: a number of special vehicles 3800- 4700mm wheelbase
(9) Control/drive mode: wired remote control/independent hydraulic unit.
Work Shop Shows
Other products
Packaging & Shipping
Why Choose Us
--WHAT ARE OUR ADVANTAGES ?
**Competitive price--We work as the leading dealers of Various leading China TRUCKS and SEMI TRAILERS, and Construction machinery manufactures/factories, and are treated with best dealership prices every year. From comparison and feedbacks from clients, Our price is more competitive than others even manufacturers/ factories.
**Ouick Response--Our team is consisted of a group of dilligent and enterprising people. Working 24/7 to respond client inquires and question all the time. Most problems can be solved within 12 hours.
**Fast Delivery--Normally it will take more than 30 days for manufacturers/factories to produce the ordered machine, while we have a variety of resources, locally and nation widely, to receive machines timely manner.
--HOW LONG WILL OUR PRICE BE VALID?
We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year, We only adjust our price based on two situations:
** The rate of USD: RMB varies significantly according to the international currency exchange rates.
** Manufacturers/Factories adjusted the trucks and machinery price, becaue of the increasing labor cost, and raw material cost.
--WHAT LOGISTICS WAYS WE CAN WORK FOR SHIPMENT?
We can ship trucks, trailers and machinery by various transportation tools.
**For 90% of our shipment would go by sea, to all main continents such as South America, Middle East, Africa, Oceania and Europe etc. either by container or RoRo /Bulk shipment.
**For neighborhood countries of China, such as Russia, Mongolia, Kazakhstan, Uzbekistan etc., We can ship trucks trailers, machinery by Road or Railway.
**For light spare parts in urgent demand, we can ship it by international courier service. such as DHL, UPS, TNT, or Fedex.
1**You please send us your enquiry;
2**We shall reply you with the quotation within 12 hours;
3**We negotiate on the configuration that you need;
4**Confirmation of the tech data → sign contract (P/I) → 30% deposit → production;
5**Manufacturing process updated news → completing production;
6**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
){kind=link}